Key features
Almost no odour - Compared to other resins on the market our Platinum LCD resin is relatively odour-free!
UV & weather resistant
Fast printing with short curing times
High-resolution 3D printing with fine detail
Vivid colors with an extremely high level of colorfastness
Truly opaque and translucent colors available
No discoloration and/or yellowing
Excellent dimensional accuracy and low shrinkage
Low water absorption
Compatible with all open source LCD and DLP in the range of 385 - 420nm
Applications
Figurines and models
Functional prototyping
End-use products
Resin properties (uncured liquid)
Viscosity: 500 cps at 25°C
Density: 1.18 g/cm2
Mechanical properties
Test method on post cured objects through 10 minutes high power mercury curing.
Properties | Typical Value | Test Method |
Glass transition temperature (Tg) | 51°C | ASTM D7028 |
Water absorption | 0.4% | ASTM D570-98 |
Impact strength (IZOD notched) | 18 J/m | ASTM D256A |
Tensile strength | 45 MPa | ASTM D638M |
Tensile Modulus | 1000 MPa | ASTM D638M |
Elongation at break | 8% | ASTM D638M |
Flexural Strength | 66 MPa | ASTM D790M |
Flexural Modulus | 1800 MPa | ASTM D2240 |
Shore D Hardness | 82 | ASTM D2240 |
Elegoo Saturn 4K - (Solid White Resin)
50µm
First / Burn-in Layers: 3x to 4x for 20 to 30 Seconds
Normal Layers: 2.3 to 2.8 Seconds
Lifting Distance: 9mm
Light-off Delay: 1
Bottom Light-off Delay: 3
100µm
First / Burn-in Layers: 3x to 4x for 20 to 30 Seconds
Normal Layers: 4 to 5 Seconds
Lifting Distance: 9mm
Light-off Delay: 1
Bottom Light-off Delay: 3
Preparation(s) before starting to print
Shake the bottle for at least 2 minutes before each use.
After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
The resin can be poured back from the vat into the bottle once your print is finished
Always use protective measurements like safety glasses and nitrile gloves when handling resins.
Post-processing
We do advise you to post-process your 3D print in order to achieve the material properties
Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
An ultrasonic cleaner is preferred/recommended
Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
The preferred curing wavelength is between 300-410nm
Safety
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.
Product export information
| HS Code: 2916140090 | Description: Resin for 3D Printing | Country of origin: the Netherlands |
Specifications for Platinum LCD Series - General Purpose Resin
| Uncategorized | |
|---|---|
| Color | Clear or Translucent Aquamarine or Solid Black or Solid Light Grey or Solid White or Translucent Blue or Translucent Black or Translucent Orange or Translucent Red or Translucent Yellow |
| Dimensions | |
| Volume | 500ml |
