FormFutura Luvocom 3F PAHT 9936 BK is an unreinforced and high-temperature resistant polyamide 6 (PA6) based 3D printer filament that is engineered for industrial applications. This 3D printing filament features the strength and toughness of pure PA6 nylon without sacrificing any of its printability. Luvocom 3F PAHT 9936 BK filament exhibits a 50% lower water uptake at a four times slower rate compared to standard PA6 nylon filaments and is optimized for 3D printing strong parts with a high quality surface appearance.
Luvocom 3F PAHT 9936 BK is temperature-resistant up to 160 °C and has an outstanding mechanical performance, making it a perfect PA6 filament for 3D printing functional prototypes and end-use parts with an extremely high dimensional accuracy.
Key features
Lehvoss Luvocom 3F PAHT 9936 BK inside
Unreinforced PA6 filament with high strength and toughness
Temperature resistant up to 160 °C (200h)
50% reduced water uptake at a four times slower rate compared to other PA6 filaments
Tensile strength up to 78 MPa
3D prints with high dimensional accuracy and increased layer adhesion
Good electrical properties
Applications
Dynamically-stressed parts
Functional prototypes
Jigs, tools, and fixtures
End-use parts
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.10mm | Experience level: Expert |
| Print temp: ± 255 - 275° C | Fan speed: 0 - 25% | Drying: 4h @100°C or 12h @70°C |
| Heat bed: ± 60 - 70° C | Enclosure needed: No | Adhesion: EasyFix Nr. VI |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.25 g/cc | 0.2 Kg spool | 0.5 Kg spool | |||
| Ø 1.75mm | ± 67m | ± 166m | |||
| Ø 2.85mm | ± 25m | ± 63m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Specifications for LUVOCOM® 3F PAHT 9936 BK
| Uncategorized | |
|---|---|
| Color | Black |
| Dimensions | |
| Diameter | 1.75mm or 2.85mm |
| Weight | 500 gram or 200 gram |
